0

EVE Audio SC208 2-Way 8 inch Midfield Professional Studio Monitor Speakers – Pair

EVE Audio SC208 2-Way 8 inch Midfield Professional Studio Monitor Speakers – Pair

EVE Audio SC208 2 Way Professional Studio Monitor Speakers – Pair

The SC208 is two-way system series featuring the ease of use and detailed timbre reproduction. With a larger woofer and more powerful amplifiers, the SC208 is used as a main speaker in a lot of professional and home-studios. If you’re looking for a capable and detailed set of above-average size monitors try the SC208.

Tech Talk

With the SC208, you will be able to extend your bass frequency response down to 36 Hz. Our custom-made 8″ SilverCone woofer driven by a sophisticated low distortion copper cap magnet system with our 1.5″ voice coil will guarantee that you will not run out of bass response when it comes to the critical listening and comparison of your mixes. The result is a very tight and dynamic bass, along with the usual greater linear excursion provided in every other EVE Audio model.

Our PWM amplifier, with protection-limiting, is able to deliver a short-term output power of 150W for a maximum output level of 112 dB (SPL @ 1m). So you can be sure that there will be plenty of power to make critical and precise judgements over your mixes.

The SC208 also uses our proprietary AMT (Air Motion Transformer) RS2. The RS2 stands for Ribbon System 2, meaning it has a bigger front plate and a larger magnet driving the motion with the utmost efficiency.

As with every other EVE Audio speaker, you get both balanced XLR inputs and unbalanced RCA inputs for greater convenience.

DSP / Smart-Knob

All EVE Audio monitors feature a high-resolution DSP electronics. A high-quality analog/digital converter from BurrBrown (24bit/192kHz) converts the analog input signal supplied via RCA or XLR. The DSP ensures latency-free filtering and simultaneously protects the entire frequency range from overload. When switched on, the volume of the monitor increases slowly to leave enough time to reduce the source volume if the input signal is too loud.

Adjustments to the acoustic environment can be made via the front rotary/pressure encoder, the SMART-knob with rotating LED ring. This knob allows the levelling of system volume as well as the adjustment of filters for room variables (low shelf, mid eq and high shelf filters). All settings are displayed on the LED ring, providing instant information about the selected values. The brightness of the LED ring can be adjusted for dark studios or video applications.

High-quality Class D amplifiers complete the system and deliver enough power to the demands of modern music production. Selected volume and/or filter settings can be independently fixed with DIP-switches that are positioned on the rear of the amplifier to prevent unauthorised or unintentional adjustments.

Bass Port Design

It’s all in the geometry. One of the downside effects of port compression is bass distortion. As you turn up the volume, the efficiency of the port reduces and distortion will increase.

We opted for a large rear rectangular port with no hard edges for our bass port designs. That’s one of the reasons EVE monitors have a high efficiency on the lower frequencies.

The results? High sound pressures with tight and punchy bass frequencies that don’t cause port distortion. Crank up the volume, and EVE will deliver a round bass. And with no holes to look at every time you glance at your speakers.

Measurements

Free-field frequency response (1/6 oct.)

Red = 0° / Green = 30° horizontal off-axis

Distortion Orange = 2nd / Green = 3rd vs frequency response (red)

Polar pattern (1m)Red = 200Hz / Green = 1kHz / Blue = 5kHz

Description Midfield Monitor
Dimensions (WxHxD) [mm] 255 x 390 x 330
Dimensions (WxHxD) [“] 10.04 x 15.35 x 12.99
Free-field frequency range (-3dB) 36Hz – 21kHz
Tweeter AMT RS2
Woofer 200mm/8″
Cross-over frequency 2800Hz
Max SPL per pair 120dBspl
Number of amplifiers 2
Output power (woofers) 150W
Output power (tweeter) 50W
Protection limiter
Settings
Volume -inf. – +6dB
High-shelf filter (-5dB – +3dB) > 3kHz
Desk filter boost (0dB – +3dB) 80Hz
Desk filter cut (-5dB – 0dB) 160Hz
Low-shelf filter (-5dB – +3dB) < 300Hz
LED brightness setting
Level-lock dip switch
Filter-lock dip switch
Woofer-change dip switch (L/R)
Connectors
XLR in (impedance) (10k)
RCA in (impedance) (10k)
Power consumption
Standby < 1W
Full output 170VA
Misc.
Weight [kg/lb.] 10.9 / 24